Limitations Bpn
Do not use these fuzes for firing at targets closer than 731 meters 800 yards to friendly positions. Use the highest charge commensurate with range for maximum fuze reliability. Fuzes are not fully effective against airborne targets. After proximity arming, fuzes may function under influence of nearby bursts or fragments. Firing on overcast days can result in increased frequency of downrange prematures. Not all models are interchangeable for use in all weapon systems. See Difference Between...
Dodac D Lxm
UNO serial number-----------------0168 UNO proper shipping name ------- Projectile Drawing number -------------------- 9381131 Top packaging drawing number DOT registration number ---------- EX-8905282 wood container EX-9206043 metal container UNO serial number -------------- 0060 Hazard class division and storage compatibility group -- 1.1D DOT class--------------------------Class A explosive DOT marking ----------------------- CLASS A SUP- PLE-MENTARY CHARGE EXPLOSIVE -HANDLE CAREFULLY
Detonating Fuzesclass A Explosives N
Detonator, tetryl booster lead charge, and tetryl booster charge Std - USMC use - AMCTC 7198 dtd 1969. Point Detonating Fuze M717 is a superquick, delayed arming impact fuze used with 60mm mortar HE cartridges. The aluminum fuze head contains a spring -loaded striker and firing pin. A spring-loaded cylindrical slider, mounted transversely in the aluminum fuze body, contains the detonator and is equipped with an O-ring pressure seal. Inbore safety is provided by a spring-loaded bore riding pin...
Difference Between Models Nje
Fuze M68A1 is slightly larger but lighter than Fuze M68 otherwise the fuzes are identical in design. Tabulated Data Temperature Limits Refer to complete round for upper and limits. M68A1----------------- 1.44 lb Explosive Components Length Overall Primer No. 26 M68 , No. 31 M68A1 , M68A1 ------------------------------ 3.527 in. black powder delay pellet, Detonator M17, M68 --------------------------------- 3.46 in. tetryl booster Charge, and Tracer Assembly M5. Thread size...
Projectile Millimeter Heat Guided Cannonlaunched M
Cannon Launched Guided Projectile M712, Copperhead, is a 155mm, separate loading, laser-guided, high-explosive, projectile. It is intended to be used against tanks, armored vehicles, and other moving or stationary hardened targets. The M712 projectile is designed for use with M109A1 A2 A3, M198, and M114A2 howitzers. The M712 projectile consists of three main sections a forward section guidance section , a center section warhead or payload section , and an aft section control section . The...
Description Fkk
The complete round consists of a projectile body, a PD fuze, and a tail assembly. The steel body contains a perforated vane assembly and is designed to accommodate a burster casing containing an initiator charge and a burster charge. Cartridges loaded prior to 1963 have a tetrytol burster charge those loaded after 1963 use a Composition B burster charge. The tail assembly consists of a pressure plate and rotating disc, a propelling charge, a striker nut assembly, a cartridge container and...
Info Ojg
M110 M110E1 burster loaded with tetrytol cannot be stored or fired at temperatures exceeding 125 F 52 C
Cartridge Millimeter Smoke Wp M With Fuze Pointdetonating M
ling charge. The gases from the burning propel-lant expand and propel the cartridge out of the mortar tube. The fuze, point-detonating PD , M935 functions either superquick, or on delay 0.05 seconds. This cartridge is used against personnel Tabulated Data and materiel as incendiary device and to produce a screening. This cartridge is for use in Complete Round the M120 120mm mortar system 28.65 lb in. The complete round consists of a fuze, 665 mm three types of propellant increment, fin assem-...
Tm Drb
Type Classification C amp T AMCTC 6558 dtd 1969. These adjustable, delayed-arming fuzes are used in deep cavity projectiles fired in 90mm and 120mm guns, 105mm howitzers, and 4.2-inch mortars against surface targets. The fuze contains a radio continuous wave transmitter detector with antennas and a power supply which performs the target detection function. A plastic nose cone is fixed to a rotatable setting ring with a single index line. The setting ring is connected to a clock-work timing...
This Page Intentionally Left Blank Ala
This cartridge is used in 57mm recoilless rifles for target practice. The cartridge consists of a perforated metal cartridge case, containing a plastic liner, which is crimped to a steel projectile. The cartridge case liner is loosely filled with propellant and the cartridge case is equipped with a percussion primer. The primer ignition tube extends through the length of the propelling charge. The projectile resembles the HE round M306A1 with the same shape and pre-engraved rotating band...
This Page Intentionally Left Blank Tia
FUZE, PROXIMITY M514, M514B1, M514A1 FUZE, PROXIMITY M514, M514B1, M514A1 These fuzes are of the adjustable delayed-arming type which are activated by the receipt of reflected radio transmissions emitted from the fuze upon target approach. The fuzes contain radio transmitters, antennas and receivers and are energized upon firing. Certain models of this fuze provide for impact functioning PD action or the option for a PD setting, but this characteristic is not common to all models. The fuzes...
US Army Pack
Packing ------------------------------ 50 rounds in Weight ------------------------------ 53 lb Dimensions ----------------------- 26-3 8 x 16-1 4 cube --------------------------------- 1.5 cu ft Packing drawing number ----- 9251995 Packing, PA 120 --------------------- 32 rounds in Weight ------------------------------- 42 lb Dimensions ------------------------ 18.76 x 10.39 Cube --------------------------------- 0.72 cu ft Packing drawing number ------ 12928042 PA -120 metal container------...
N
UNO serial number--------------- 0410 UNO proper shipping name ----- Fuzes, detonating MILD Detonating Fuze Lead, Multipurpose PA510 For point detonating function, a minimum impact velocity equivalent to 450 fps against l 8-inch steel plate is required, The fuze may not function or may function on impact if set for a time-to-airburst shorter than required for arming.
Tm Tm Vzb
To provide improved antipersonnel capability when loaded in 105mm cartridge, M413. The grenade M35 is a ground burst munition consisting essentially of a steel ball with an aluminum skirt and a point-detonating grenade fuze and striker in the nose. Two nylon ribbon streamers, attached to the inside of the aluminum skirt, orients and drag-stabilizes the grenade in flight. The steel ball is filled with 28 grams of Composition B. Three grenades in the layer next to the base plug of the M413...
Info Omu
Howitzer, Self-Propelled, M109A5, M109A6 M284 Firing below charge 3 may result in stickers when fired in M185 and M199 cannons for M825 only . Firing tables for M825A1 are under preparation . For the M825 use FT 155-ADD-S-O-Q Refer to FT 155-ADD-Q-O for corrections to FT 155-AN-l for the M825 M825A1. Firing Tables are under preparation. Firing Tables are under preparation. from the M825 M825A1. Presence of the obturator is essential for proper firing.
Sb Rrp
TM 9-1010-230-23 amp P TM 9-1010-230-10 TM 9-1300-251-20 TM 9-1300-251-34 This dummy cartridge is used as a drill round to tram users in handling ammunition and loading the MK19 series grenade machine gun and the Ml29 grenade launcher. This cartridge is completely inert and simulates a loaded round of 40mm HE ammunition in size, shape, and weight. This fixed round is a one piece solid aluminum round. There is no separate cartridge case. Four grooves allow easy repositioning of M16A2 link after...
Handle Carefully
Detonator M47, Relay M11 and Detonator XM87. Firing over the heads of exposed friendly troops is prohibited. TM 9-1000-205-12 TM 9-1300-251-20 SC 1340 98-1L SB 700-20 3.787 in. Overall -----------------------------5.287 in. Thread size --------------------- 1.8-16UNS-1A Assembly Dwg. No.--------------10542850 Mechanical Time Fuze M711 is designed especially for use with flechette-loaded 90mm Cartridge M580. The fuze consists of an aluminum head, a lower cap containing a timing movement, and a...
Description Laf
The projectile consists of a subprojectile and sabot. The subprojectile consists of a monolithic staballoy depleted uranium core, which is fitted with an aluminum windshield with steel tip to eliminate aerodynamic heating and an aluminum fin assembly. The aluminum sabot, composed of three 120 degree sections, is assembled around the subprojectile. A steel bourrelet, containing three shear cuts, is screwed to the sabot forward face. A nylon obturator and polypropylene seal is assembled around...
Description Tez
The fuzes consist of a movement assembly, a point detonator assembly a lower cap, a body and a booster. The movement assembly contains a clockwork mechanism operated by centrifugal force acting on two gear segment weights. Springs assist in overcoming the inertia of the weights to assure functioning of the fuze at low projectile spin rates. The point detonator assembly housing the super-quick element consists of the nose of the fuze containing firing pin and support, and the head of the fuze...
Ar Fqb
rpm . This delayed arming provides a safety distance from the muzzle of at least 26 feet. Upon either impact or graze, the impact ball drives the striker and firing pin forward into the detonator. The detonator flash fires the booster lead charge and the booster charge to detonate the projectile. Overall length ---------------------- 4.870 in. Assembly Dwg. No------------------ 8860724 Thread size -------------------------- 1.8 in.-12UNS- Refer to complete round for upper and lower limits.
Ma Ghl
Maximum rotation where fuze unit will not arm RPM ------------------1050 1300 1050 1075 will arm RPM -------1 800 2125 1800 2025 Lead Azide ------------------------ 180mg The delay assembly Ml M739 only Delay Element M2 Lead Azide, Type I Delay Composition Boron Particles - 16 S amp A Assembly Detonator M55 RDX ------------------------------- 19 mg Lead Explosive -------------------- PA508 Comp AS, Type VI a or h ------ 172 mg Booster Pellet, Comp A5, Type VI a or b _____ 21 g more than 3 days...
Description Yip
The external appearance of the M831A1 cartridge is similar to the M831 training round as well as the M830 service round. The M831A1 round consists of an inert projectile composed of a steel spike, aluminum body, ring, stabilizer and nylon obturating band. The fin and boom on the present M831 have been replaced by a stabilizer with six equally spaced slots which impart spin to the M831A1 projectile. The combustible cartridge case, combus tible case cap, case base and seal assembly are the same...
Chapter Ammunition For Grenade Launchers
Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter Practice, M382 Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter Practice, Cartridge, 40 Millimeter Practice, Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter Practice, Cartridge, 40 Millimeter HEDP, M430, M430A1 Cartridge, 40 Millimeter HEDP, M433 Cartridge, 40 Millimeter HE, Cartridge, 40 Millimeter Multiple...
Projectile Millimeter He M Normal And Deep Cavity
Deep Cavity Std OTCM 36841, dtd 1958. Normal Cavity Std OTCM 36841, dtd 1958. This projectile is fired from 155mm howitzers and is used for blast effect, fragmentation, and mining. The projectile is a hollow steel shell filled with 14.6 pounds of TNT or 15.4 pounds of Composition B. The shape is ogival with a boat-tail for aerodynamic efficiency. A supplementary charge of 0.3 lb TNT is contained in an aluminum liner in the deep fuze cavity. A threaded lifting plug closes the fuze cavity at the...
Info Buu
Maximum range 11,500 m Muzzle velocity 494 mps 1621 Lower limit -40 F -50 F -50 F Upper limit 125 F 145 F 145 F Storage 1 round in fiber container 2 containers in wooden box Weight 1201b Dimensions 37-1 4 x 1115 16 x 7-19 31 in. Cube 2.0 cu ft NOTE See DOD Consolidated Ammunition Catalog for complete packing data including NSN's. Quantity-distance class 12 1.2 DOT designation AMMUNITION
Temperature Limits Blo
Provided that the loader rammer is operating properly and the rotating band of the projectile has not exceeded its wear limit, the extraction force will be in excess of 2000 pounds. Wear limit for the rotating band is 100 rams after which it can be reversed and used for 100 additional rams. After the M845 has been rammed and extracted 200 times, the rotating band must be replaced. A separately issued rotating band kit 1320-01-112-2627 is available for requisition. Reasonable care should be...
Sb Amcp Tm Cjf
This cartridge is used in 57mm recoilless Rifles M18A1 and M18 and is intended primarily for screening and spotting. WP Cartridge M308A1 includes a perforated cartridge case containing a plastic liner and a percussion primer. The propelling charge is loosely loaded into the plastic liner. The cartridge case is crimped to the projectile just behind the pre-engraved rotating band. A steel adapter forms the front end of the projectile. The burster is press-fitted into the adapter, and the fuze is...
Mkab
Propellant ------------------------M2, 0.56 lb Primer ----------------------------- M23A2 percussion Maximum range ----------------4459 m 4980 Muzzle velocity----------------- 328 mps 1100 Lower limit ---------------------40 F Upper limit-------------------- 125 F Lower limit -------------------- -80 F for period Upper limit-------------------- 160 F for 1 round per fiber container 20 containers per wooden box lb x cube ------------------------------- 1 cu ft NOTE See DOD Consolidated...
Ar Tqk
M3A1 Std AMCTC 4633 dtd 1966. M3 Std AMCTC 4633 dtd 1966. The M3 series propelling charges are green bag type designed for use in I55mm howitzers for firing in Zones 1 through 5. The full charge consists of approximately 5.50 pounds of propellant including a base charge and four unequal increments loaded in cloth bags. The hags are fastened together with four cloth straps sewn to the base and tied on top of Increment 5. Charge M3 is assembled. without flash reducer pads. Charge M3A1 includes 3...
Info Cmr
Muzzle Max Range Eleva- Fuze Charge Velocity to Function tion Setting _ mps _ m _ mil sec
M3a1 Green Bag Msds
This ammunition is not tobe fired or stored at temperatures higher than 125 F because of the tetrytol burster.
Ammunition For Cannon With Solid Projectile C
Maximum range --------------- 23683 m 25,290 yd UNO serial number -Muzzle velocity ---------------- l,064 mps DOD hazard class 3,500 fps Storage compatibility DOT shipping class -DOT designation ----- Upper limit---------------------- 125 F Drawing number Lower limit ---------------------- -80 F for period Limitations Upper limit---------------------- 160 F for
Sb Amcp Tm Tm Kmx
This cartridge is used to train personnel armed with the 90mm recoilless rifles in handling and use of HEAT rounds. The cartridge resembles 90mm HEAT round M371A1 and has similar ballistic characteristics, except that the high explosive filler is replaced with inert material of the same weight. A standoff spike with piezoelectric element in the nose cap is threaded to the nose of the projectile, and an adapter and fin are threaded to the base. The point initiating, base detonating fuze is...
Description Pyq
The projectile consists of a subprojectile and sabot. The sub subprojectile consists of a steel-nickel body, which houses a tungsten core and is fitted with an aluminum windshield and fin assembly. The aluminum sabot, composed of' three 120 degree sections, is assembled around the subprojectile. A steel hourrelet, containing three shear cuts, is screwed to the sabot forward face. A nylon obturator and polypropylene seal is assembled around the sabot, and a urethane seal is applied over the rear...
Ma Heh
No preparation is required except adjustment of the charge according to the firing zone intended. Erratic range results may be expected when firing M4 series charge in Zones 3 and 4, so Green Bag M3 series charge should be used for those zones when available. SB 700-20 AMC-P 700-3-3 TM 9-1300-251-20 TM 9-1025-200-12 amp P TM 9-2350-311-10 This propelling charge is designated Zone 8 and extends the range of 155mm Howitzer M109A1, M109A2 A3, and M198. Propelling Charge Ml19 Ml19Al is a...
Fuze Proximity M Clc
armed after 400 calibers of air travel and remains armed throughout flight. The burst height is essentially optimum, regardless of projectile size of angle of fail. Proximity Fuze M732 is designed for use on conventional, high-explosive ammunition specifically, 105mm, 155mm, 175mm, and 8-inch artillery ammunition, and 4.2-inch mortar ammunition, with a standard 2-inch thread. Action may be either proximity air burst or impact, Arming is initiated by setback and completed by the spinning of the...
Instruction Modular Artillery Charge
The M232 propelling charge is the Modular Artillery Charge System MACS high-zone charge used with 155mm field artillery cannon systems. The charge has been optimized for use in the Crusader Field Artillery System but is compatible with all 155mm 39 caliber tube length systems in the US inventory. Zoning is accomplished through the addition of increments. No less than three or more than five M232 increments may be used in a single shot in a 39 caliber length tube. The M232 propelling charge is...
Ma Na
UNO serial number 0367 UNO proper shipping name Fuzes, detonating Electric stab battery primer PA536 Piston actuator PA535 Lead charge PA534 Electric detonator PA537 If the fuze fails in the time mode or impacts before a time setting expires, there is no true PD back-up however, the round may or may not function on ground impact. SC 1340 98-1L SB700-20 TM 9-1015-203-12 TM 9-1015-234-10 TM 9-1025-200-12 amp P TM 9-1025-211-10 TM9-2350-311-10 TM 9-2350-304-10 TM 43-0001-28-4 TM 43-0001-28-5 TM...
Dodac D Fne
UNO serial number -------------- 0245 UNO proper shipping name --- Ammunition
M Cannon Tube Mm
Ml16 and M116B1 restricted from overhead fire with Zone 7 of M4A1 and M4A2. Charge due to possible base plate separation creating down range safety hazard M728 Proximity Fuse cannot he fired w Zone 8's, M203 Propelling Charge. The 119A2 Charge Zone 7 is equivalent to M119 M119A1 Charge zone 8. Refer to firing tables for small differences in velocity which affect range Firing at charge 2 may result in sticker occasionally
Explosive Components Tul
Detonator M42, tetryl booster lead charge and tetryl booster charge. Refer to complete round. References TM 9-1300-251-20 FUZE, POINT DETONATING M508A1 AND M508 SERIES FUZE, POINT DETONATING M508A1 AND M508 SERIES Type Classification OBS-MSR11756003. Point Detonating Fuzes M508A1 and M508 are single-action, delayed arming impact fuzes used to detonate 105mm, 155mm, and 8-inch gas or smoke WP projectiles. The M508 series fuzes consist of a PD head assembly containing a firing pin held in...
Note 1
Loss or unauthorized firings of the M900 must be reported to the HQ, AMCCOM RPO within 24 hours of the discovery. Report to CDR USA AMCCOM ATTN AMSMC-SF RPO Rock Island, IL 61299-6000 DSN 793-2969 2964 2965 2966 Commercial 309 782-2961 2965 782-2964 2966 DO NOT FIRE M900 CARTRIDGES WHERE THE PROJECTILE IS LOOSE WITHIN THE CARTRIDGE CASE I. E., ROTATING, WOBBLING, RATTLING, OR ANY OTHER UNSECURED MANNER. THIS CONDITION MAY RESULT IN EXCESSIVE PRESSURE WHILE FIRING RESULTING IN CATASTROPHIC...
He
Length ------------------------------ 20.813 in. 20.833 when assembled w Fuze, PD M524A6 Cannon used with --------------- M1, M29, Body material -------------------- Steel alloy Color -------------------------------- Olive drab Filler and weight ---------------- Comp B, Fuze --------------------------------- PD, M567 PD, M524A6 Alternate Fin assembly --------------------- M24 Propelling charge ------------------- M205 Propellant ------------------------- M10 Ignition cartridge ---------------...
Note Vfb
Use Flash Reducer XM5 with Lots IND 119 through IND 1-77 of Propelling Charge M86AI when fired at Zone 3 only. Bore-wear-reducing Additive Jacket Ml is Tabulated Data used with Increment No, 3 when firing M86 Series Propelling Charges at full charge, It con- Propelling Charge sists of two 10-1 2 x 18 x l 8-inch White bag sep- sheets of additive mixture stitched together. arate loaded The additive mixture is composed of 47 percent propelling titanium dioxide and 53 percent wax. The cloth charge...
Ar Ufz
Type Classification burning propellant propel the projectile from the gun and ignite the tracer which burns for a STD AMCTC 1103 dtd 1963. minimum of 2.5 seconds. This cartridge is for use in 105mm gun cannons for training in marksmanship. Description Type -------------------------------- TP-T Weight ----------------------------- 45 lb The cartridge is similar in external appear- Length ----------------------------- 39 in. ance and ballistically similar to HEAT-T car- Cannon used with...
Mps 1
1 round in fiber container 1 container in metal container Fiber container PA111, Dwg Metal container PA117, Dwg Total weight 66.1 lb 44-1 2 x 6-7 8 x 1.2 cu ft NOTE See DOD Consolidated Ammunition Catalog for complete packing data including NSN's. UNO serial number
Ar Kao
Type Classification Functioning The M231 propelling charge is the Modular Artillery Charge System MACS low-zone charge used with 155mm field artillery cannon systems. The charge has been optimized for use in the Crusader Field Artillery System but is compatible with all 155mm 39 caliber tube length systems in the US inventory. Zoning is accomplished through the addition of increments. No more than two M231 increments may be used in a single shot. The M231 propelling charge is comprised of a...
Dod Consolidated Ammunition Catalog Sb.
Cartridge case ------------------- M14 series Propelling charge --------------M3, dummy Primer -----------------------------M1B1, inert 1 round in fiber container 2 containers in wooden box NOTE See DOD Consolidated Ammunition Catalog for complete packing data including NSN's. DOT designation ------------------DRILL
Temperature Limits Cvm
Lower limit 65 F Upper limit 165 F Lower limit 65 F Upper limit 165 F Quantity-distance class 04 1.2 DOT shipping class A DOT designation DETONATING FUZES-CLASS A EXPLOSIVES