Target and Competition Conversion Kit models
After having cleaned and lubricated the pistol, if necessary clean and lightly oil the inside of the counterweight sleeve.
ASSEMBLY
Assemble following the Field Stripping procedure in reverse order. It is advisable to pay attention to the following points:
• Engage safety
•The barrel should rest perfectly flush against the slide (the extractor must lodge in its groove in the barrel)
•The locking block lugs should rest in their housing (the locking block plunger should protrude from the barrel base).
•The recoil spring guide head should lodge in the center of its groove in the locking block.
•When rotating disassembling latch, the slide should be in the closed position (aligned with or beyond the rear side of frame).
Target and Competition Conversion Kit models
To assemble the counterweight sleeve (with barrel assembled to slide):
•Check that the barrel-counterweight spacer is placed in position
• Insert the counterweight sleeve on the barrel and screw the locking screw to the end with the Allen key of the multiple spanner supplied, taking care that the counterweight sleeve is aligned with the slide.
•Screw on the ring nut and lock it using the multiple spanner supplied.
Post a comment